2017 New Low-Cost Pre-Made Warehouse
|1,000-4,999 5,000-9,999 10,000+|
|FOB Unit Price:||US $49 US $44 US $39|
|Purchase Qty. (Square Meters)||FOB Unit Price|
|Production Capacity:||300, 000 Ton/Year|
|Transport Package:||Flat Packed in 40′hq, Gross Weight: 26ton.|
|Payment Terms:||L/C, T/T|
- Model NO.: K-w010
- Standard: GB
- Forming: Hot-Rolled Steel
- Member: Steeltruss
- Carbon Structural Steel: Q235
- Application: Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor
- Origin: Jining, Shandong
- Type: H-Section Steel
- Trademark: Quality Carbon Structural Steel and Alloy Structural Steel, Classic Group
- Connection Form: Bolt Connection
- Type of Steel For Building Structure: High-Strength Steel
- Residential Wall Structure: Wall Support
- Specification: 13.58m x 2.34m x 2.71m
1. Item Advantages
Prefabricated Light Steel Building Frame
a. High Strength The high strength of steel per unit of weight means that structure weights will be small. This
fact is of great importance for long-span bridges, tall buildings, and structures having poor foundation conditions.
b. Uniformity The properties of steel do not change appreciably with time as do those of reinforced concrete structure.
c. Elasticity Steel behaves closer to design assumptions than most materials because it follows Hooke's law up to fairly high stresses. The moments of inertia of a steel structure can be definitely calculated while the value obtained for a reinforced concrete structure are rather indefinite.
d. Permanence Steel frames Prefab Steel Workshop that are properly maintained will last indefinitely. Research on some of the newer steels indicates that under certain conditions no painting maintenance whatsoever will be required.
e. Ductility The property Prefab Steel Workshop of a material by which it can withstand extensive deformation without failure under high tensile stresses is said to be its ductility. When a mild or low-carbon structural steel member is being tested in tension , a considerable reduction in cross section and a large amount elongation will occur at the point of failure before the actual fracture occurs. A material that does not have this property is generally unacceptable and is probably hard and brittle and might break if subjected to a sudden shock .
II, Parameter &Specification
|Parameters||Name||H Beam Steel Structure Warehouse with Office|
|Anti-earthquake Grade||As per your requests|
|Service Life||Within 50 years|
|Other Performance||Anti-static, Anti-moist, strong enough and easily assemble|
MAIN STEEL PART of Steel Workshop
1. H section steel columns, beams and wind-proof columns
2. With treatment of one time red-oxide primer painting and two times grey facing painting
SECONDARY STEEL PART of Steel Structure Warehouse
1. Roof & Wall C/Z Purlin
2. Tie Bar: φ 89*3.0
3. Roof Support & Support between Columns: φ 20
4. Bracing Bar: φ 12
5. Knee Bracing: Angle Steel
ROOF & WALL CLADDING
1. Roof & Wall Corrugated Single Steel Sheet: 0.3mm-0.6mm
2. Roof & Wall Sandwich Panel Insulated with EPS Foam, Glass wool, Rock wool and PU: 50mm-150mm
3. Transparent Sheet (FRP): 1.0mm-2.0mm
4. Flashings: Made by Color-coated Corrugated Steel Sheet
WINDOW & DOOR
1. Window: PVC Window or Aluminum-alloy Window
2. Door: Sliding Door or Roll-up Door
High-strength Bolt; Common Bolt and Nut; Self-tapping Screws; Foundation Bolt and Nut, ETC
III, The following question we need to know before making the price.
|1||Location (where will be built?)||_____country, area|
|3||wind load (max. wind speed)||_____kn/m2, _____km/h, _____m/s|
|4||snow load (max. snow height)||_____kn/m2, _____mm|
|6||brickwall needed or not||If yes, 1.2m high or 1.5m high|
|7||thermal insulation||If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be suggested; . if not, the metal steel sheets will be ok. The cost of the latter will be much |
lower than that of the former
|8||door quantity & size||_____units, _____(width)mm*_____(height)mm|
|9||window quanity & size||_____units, _____(width)mm*_____(height)mm|
|10||crane needed or not||If yes, _____units, max. lifting weight____tons; max. lifting height _____m|
IV. About Us
Shandong Classic Heavy Industry Group Co., Ltd. is a large enterprise group which is focused on steel structure, medical apparatus and instruments and architectural design as the core industries, and at the same time engaged in material trade, curtain wall decoration, annatto furniture, landscaping, and culture media. Classic Group was named from "Pragmatism and Classic" and founded in 2001. With years of development, Classic Group has changed from a singleness steel structure construction industry into a comprehensive enterprise group which owns 10 subsidiary corporations. Our total assets is 2.6 billion yuan and fixed assets 1.5 billion yuan. It covers an area of 540,000 square meters of land and workshop of 260000 square meters, building area 100,000 square meters, 2300 staffs and 500 technical personnel.
Classic Group is always adhering to enterprise culture idea of "Concentration, Innovation, Pragmatism and Efficiency" and "Science and technology is the first productive force". We cooperated with Tongji University to establish Postgraduate Industry-University Research Practice Base and Shandong Construction University to establish Undergraduate Teaching Experimental Base.We hired Professor Yuanqi Li from Tongji University, Professor Xuejun Zhou from Shandong Construction University and other domestic famous experts as technical advisers to organise Technology Research and Development Center. We have received 16 national patents,2 scientific and technological achievements and provided a strong technical support for the new project and new technology.
Classic Group owns qualification of the First National Premium Quality Steel Structure , Steel Structure Construction of First Class Aptitude, Special Engineering Design of Class A and Curtain Wall Decoration Design of Class B. we also have 26 production lines, 110,000 square meters production workshop. Our annual output of lightweight and heavyweight steel are 300000 tons. We own the largest area in steel structure industry of Jining and the top one manufacture of lightweight steel and heavyweight steel. Regarding quality and reputation as the most important, we took the lead to gain the ISO 9001 Quality Certificate, the IS014001 Environmental Management System Certification and the OHSAS18001 Occupational Health and Safety Management System Certification.
V, Contact me
Please contact me:
Success in Service
We Achieve Quality Far beyond the Expection